Concrete · Melbourne · Since 2014
Epoxy Flooring Melbourne, done properly.
Flake or solid colour over a diamond-ground slab, so it bonds. Garages, workshops and commercial.
From $88/m² inc GST $80 + GST Fixed price in writing before we start.
Quicker still: text us a photo for a ballpark.
15 yrs on the tools 500+ floors Fully insured Fixed price in writing
Trusted on projects for
- Westfield Doncaster
- Knox Shopping Centre
- Mecca
- Hallmarc Homes
- LVL Group
- Cambuild
The short answer
What it is, and what it costs.
Epoxy flooring in Melbourne costs from $80 per m² + GST ($88 inc GST) for a full system, up to around $180 per m² for complex jobs: diamond grinding, crack repair, penetrating primer, epoxy basecoat and a UV-stable polyurethane topcoat. Cheap roll-on epoxy usually skips the grind and the primer, which is why it lifts and peels.
Recent jobs
Epoxy floors, on real floors.
Every photo on this site is a job we did in Melbourne, shot on handover.
Polished · terrazzo · epoxy · stone · commercial
The process
How we do it.
- 1
Diamond grind
We grind the concrete to expose a clean profile, which is critical for epoxy adhesion. Existing coatings, glue, and paint are all removed.
- 2
Repair
Cracks, holes, and joints filled with high-strength epoxy patch.
- 3
Prime & build
Penetrating epoxy primer, then two-pack epoxy basecoat. Decorative flake (if specified) is broadcast into the wet basecoat.
- 4
Topcoat
UV-stable polyurethane topcoat for chemical, abrasion, and yellowing resistance. Anti-slip aggregate optional.
Concrete
Not sure it's the right finish?
Here's how the three concrete finishes compare, on real floors, with a starting price on each.
Grind & seal · Garage Grind & seal
Ground flat and clean, then sealed with a clear coat that gives it the sheen. The budget-friendly concrete look.
- Good for
- Garages, sheds, alfresco, rentals
Polished concrete · Home Polished concrete
Diamond-ground in stages until the concrete itself shines. Nothing sits on top to peel or wear through.
- Good for
- Living areas, new builds, showrooms
Epoxy flake · Commercial Epoxy
A flake or solid colour coating, laid over a diamond-ground slab so it bonds. Grippy and easy to wipe clean.
- Good for
- Garages, workshops, commercial
Swipe to compare →
Questions
Epoxy floors: what people ask.
How long until I can use the floor?
Foot traffic: 24 hours after final coat. Light vehicles: 48–72 hours. Forklifts and heavy use: 7 days. We always give you a firm cure schedule.
Will it yellow in sunlight?
Standard epoxy can yellow in UV. We use UV-stable polyurethane topcoats on any floor that gets sunlight (garage doors, sunrooms, warehouses with skylights). No yellowing.
Can you do flake or metallic finishes?
Yes, both. Flake is the most popular for garages (durable, hides dirt). Metallic is dramatic and works brilliantly for retail and showrooms.
Get a price
Get your epoxy floors price.
Three ways to start. Whichever suits you, you'll hear back within 24 hours.
- Call 0417 035 112Mon–Fri 7am–6pm · Sat 8am–4pm
- Text a photoQuickest way to a ballpark
- Email drawingscorey@claraseal.com
Builder, shopfitter or facility manager? Send drawings or a finishes schedule and get a number back within 24 hours.
Commercial floors