Stone · Melbourne · Since 2014
Stone Sealing Melbourne, done properly.
Cleaned first, then a penetrating sealer matched to your stone. Pavers, pool coping, patios and floors.
From $22/m² inc GST $20 + GST Fixed price in writing before we start.
Quicker still: text us a photo for a ballpark.
15 yrs on the tools 500+ floors Fully insured Fixed price in writing
Trusted on projects for
- Westfield Doncaster
- Knox Shopping Centre
- Mecca
- Hallmarc Homes
- LVL Group
- Cambuild
The short answer
What it is, and what it costs.
Stone sealing in Melbourne costs from $20 per m² + GST ($22 inc GST), up to around $45 per m² where old sealer has to be stripped or the stone needs a heavy clean. The stone is deep cleaned first, then sealed with a penetrating (impregnating) sealer that soaks into the stone rather than a topical wax that sits on the surface and peels. How often it needs resealing depends on the stone, the sealer and how much sun, water and traffic it gets.
The 5 most common stone-damage mistakes (and how to avoid them)
Recent jobs
Cleaning & sealing, on real floors.
Every photo on this site is a job we did in Melbourne, shot on handover.
Polished · terrazzo · epoxy · stone · commercial
The process
How we do it.
- 1
Assess & test
We test the stone's porosity and existing finish, then recommend the right sealer chemistry: penetrating, enhancing, or topical.
- 2
Deep clean
Industrial alkaline cleaners, hot-water extraction, and surface neutralising. We remove years of grime, organic staining, and old failed sealers.
- 3
Seal in coats
Two to three coats of premium sealer applied wet-on-wet. Penetrates deep, bonds chemically with the stone, and dries invisible.
- 4
Cure & verify
Surface cures for 24-72 hours then we test water-beading on site. We don't leave until the seal is perfect.
Stone
Find your stone.
Every stone needs a different clean and a different sealer. Tap yours, or text us a photo and we'll tell you what it is.
Etched, scratched or dull? Stone restoration Old terrazzo? Terrazzo polishing
Questions
Cleaning & sealing: what people ask.
Will sealing change how my stone looks?
Penetrating sealers don't change the appearance. Your stone looks identical, just protected. Enhancing sealers (optional) deepen the colour slightly, like wetting the stone. We always show you both options before sealing.
How often does it need resealing?
It depends on the stone, the sealer and how much sun, water and traffic it gets. Pool surrounds and driveways need resealing sooner than indoor floors. We'll tell you what to expect for your stone and how to look after it.
Can you seal stone that already has a sealer on it?
Yes. We strip the old sealer first, then re-seal. Old failed sealers are usually why stone looks patchy or stained. We restore it back to bare stone, then apply the right product.
Do you work on outdoor pool areas?
Yes. Pool surrounds are one of our specialties. We use UV-stable, chlorine-resistant sealers built for the Melbourne climate. The water beading on freshly sealed stone is unmistakable.
Get a price
Get your cleaning & sealing price.
Three ways to start. Whichever suits you, you'll hear back within 24 hours.
- Call 0417 035 112Mon–Fri 7am–6pm · Sat 8am–4pm
- Text a photoQuickest way to a ballpark
- Email drawingscorey@claraseal.com
Builder, shopfitter or facility manager? Send drawings or a finishes schedule and get a number back within 24 hours.
Commercial floors